Plastic shell commonly used raw materials

Mar 03, 2022

Skildu eftir skilaboð

PC: PC is the scientific name of polycarbonate. Material performance characteristics.


1, high strength, tensile hardness 69MPa, bending strength 96MPa.

2, high-temperature resistance, long-term use can withstand the temperature of 130 degrees Celsius.

3, Transparent and non-toxic.

4,The color matching and surface etching of raw materials are not as good as ABS.

5,PC should be selected for high fluidity. Suitable for chassis used in harsh environments.


ABS: ABS (acrylic-butadiene-styrene complex) material performance characteristics.


1, low strength, tensile hardness 43MPa, bending strength 79MPa.

2, not resistant to high temperature, long-term use of room temperature is not less than 60 degrees Celsius.

3, fluidity, colorability, surface coating, and nickel plating are very good.


PC plus ABS: PC and ABS composite materials, both the characteristics of the above three, excellent molding properties to do cell phone case materials, good fluidity, high strength (tensile hardness 56MPa, flexural strength 86MPa). PC plus ABS material is mainly used for usually high requirements for appearance and color, no special requirements for the environment of the case.


Select materials according to structural characteristics.


1, PC plus ABS structure is harder, thicker walls, the structure should be preferred when the shape is complex.


2, the structure is weak, when the strength is not enough, it is appropriate to choose PC.


Hringdu í okkur
Hafðu samband við okkuref þú hefur einhverjar spurningar

Þú getur annað hvort haft samband við okkur í gegnum síma, tölvupóst eða netform hér að neðan. Sérfræðingur okkar mun hafa samband við þig fljótlega.

Hafðu samband núna!